Carpet Cleaning Machine K353 – 3 Phase

The K353 is an unmatched machine in the carpet cleaning industry.
The difference between this machine and the K352 is that the K353 has more powerful vacummotors built in for superior suction power.
The machine itself has 2 vacuummotors that may be switched on individually depending on the requirement for suction power.
Furthermore the machine also has a water pump that is used for pumping water from the machine to the tools that will be used by the operator.
The machine comes with accessories as well. Among this is:

• 1 × Floortool
• 1 × Handtool
• 2 × Lids

Specifications for the K353:

Capacity

• Clean Water Tank: 35L
• Dirty Water Tank: 42L

Vacuum Motors

• Quantity: 2 Motors
• Stages: 3 Stage
• Max Power: 2900 W
• Air Flow: 60 l/s
• Vacuum: 42 kPa

Water Pump

• Power: 180 W
• Pressure: 60 PSI
• Delivery Rate: 2.6 l/min

Suction Hose

• The 5m black suction hose has a diameter of 38mm with two cuffs, one attached to either end.
• The 5m blue pipe has the H8C and a QR(P) attached the either end of the pipe.
• The fittings are held together by two small clamps.
• The black hose and blue pipe are connected by cable ties.

Specifications on the Lids

• The lids are made op perspex with the length of about 20cm, width of about 15.4cm and heigth of 0.8cm.
• A cap is attached in the middle of the perspex.
• Rubber is glued underneath the perspex to seal completely. The height of the lid with the rubber is about 1.5cm.

It is recommended to use the Low Foam Powder with the machine as it is a tried and tested product for cleaning and also does not create a lot of foam, which is desirable for carpet cleaning.

This product comes with a 6 month warranty, limited to the repair of the product and not the replacement thereof. Usage of the machine will also be taken into account.

Please note that the 6-month warranty applies to the motor only and does not cover the other parts of the machine.

Lead time: Estimate of 3-5 Working days depending on stock availability